Clear-Com TEMPEST 2400 Spezifikationen PDF herunterladen (Seite 15)

Clear-Com Communication Systems Page 15 of 100

Tempest 2400 Wireless Intercom System

General Description

The Tempest 2400 Wireless Intercom System is a four-channel wireless intercom system that operates

with up to five wireless beltstations per base station in full duplex simultaneous operation.

Tempest operates in the non-licensed RF band at 2.4GHz. Tempest wireless systems will not interfere

with traditional wireless microphone, IFB or in-ear monitor systems that operate in the UHF TV band.

Using patented Frequency Hopping Spread Spectrum (FHSS), TDMA technology and proprietary Accu-

Sync™ base station coordination, up to ten 2.4GHz base stations and 50 full duplex wireless beltstations

can be operated in close proximity to each other in a single band while maintaining excellent system

performance.

Tempest provides connection to four separate hardwired intercom channels. Hardwired communication

interface is achieved via four distinct, external 2-Wire or 4-Wire intercom channels connected to the base

station. Tempest is compatible with Clear-Com

, RTS

, Telex

and most other 2-Wire (TW) intercom

systems, 4-Wire intercoms, and other devices. You can select one type of 2-Wire hardwired intercom

system to operate on channels A and B, and channels C and D can be enabled for a different type of 2-

Wire intercom system.

In addition, Tempest base stations offer a Stage Announce (SA) output with a relay closure contact

(GPO). This is ideal for use with Public Address Systems (PA), city-wide IFB transmitters or virtually any

application that can be triggered with a General Purpose Input/Output (GPIO).

Each of up to five wireless beltstations per base station has a unique audio path (i.e. point-to-point) that

delivers an individualized, mix minus signal to each beltstation in the system. Therefore each beltstation

can monitor a unique mix of intercom channels and other audio sources.

Each wireless beltstation can simultaneously monitor and/or talk on two of the four hardwired intercom

channels. Each wireless beltstation user may select between channels A or B and C or D. This true dual-

listen capability supports the preferred production work flow of TV and live-event professionals, and offers

the additional freedom and flexibility of a wireless intercom system.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Keine Kommentare

Clear-Com TEMPEST 2400 Spezifikationen Seite 15